Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
540 Posts
If the axle size, brake rotor bolt pattern, and cush drive fit are all the same, there's a darn good chance it will fit. Do a visual check that they haven't changed the location of any of these items, it seems a lot of manufacturers are moving the brake rotor to the same side of the wheel as the sprocket, and using a bowed spoke to fit it in. Also check to be sure the brake caliper mounts the same between the different chassis. The online microfiche sites like bike bandit are good for that sort of research.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top