Motorcycle Forums banner
1 - 1 of 1 Posts

·
MODERATOR X
Joined
·
5,449 Posts
Unless aliens have welded up the holes to drive you nuts, you should be able to bolt the caliper back on the caliper holder with attention to detail. First try screwing the bolts in WITHOUT the caliper, that will give you some idea where the holes are, and you should be able then to determine where they are with the CALIPER in place.

Good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top