Motorcycle Forums banner
1 - 2 of 99 Posts

· Super Duper Mod Man
10,479 Posts
Give some penetrating oil a shot and then the big breaker bar again. Gotta snap that bar and not torque it, if you get my drift. Two man operation here. One holds the torx fitting in the head bolt, and the big guy snaps that breaker bar with a quick motion. Either the bolt comes out or the bolt head snaps off. Good luck.
1 - 2 of 99 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.