Motorcycle Forums banner
1 - 1 of 19 Posts

5,447 Posts
Re: Green Tire Balancing Goo? What the F***?!

The only problem I've had with similar sealer/ballancer stuff is that when used with tubeless tires it sometimes glues the tire bead to the rim. But that only matters if you change your tires by hand. The machines have enough force to break the bead even if it does gets glued.

And when used in tube type tires, if you ever get a leak it flings goo all over the rear wheel and back of the bike, and glues the tire bead to the rim after a while (after sealing the leak).

I use sections of solid core solder wrapped around a spoke nipple btw. Screw the goo.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.