Motorcycle Forums banner

Motorcycle disease continues!

4060 Views 13 Replies 9 Participants Last post by  The_AirHawk
Well, I jumped in with both feet again. Tomorrow morning I will be riding the ST4 down to the local dealer and then I will ride home on a new Sport Classic!

She'll be a red GT1000 with Termi pipes and bar-end mirrors. I just figure I can't let Sarnali recycle his bikes more than I do! The ST4 was a great bike over 24,000 miles.

I just realized that all my current bikes will be air-cooled.

45 degree Vtwin
90 degree L twin
Parallel twin 2 stroke
Single 80cc 2 stroke

Not a radiator among 'em! And not one over 100 hp. I'm not gonna have any fun!:cool:
1 - 14 of 14 Posts
Come on man! At least my ancient Concours should have 100hp.

I wouldn't mind a Thruxton.
Well, I jumped in with both feet again. Tomorrow morning I will be riding the ST4 down to the local dealer and then I will ride home on a new Sport Classic!

She'll be a red GT1000 with Termi pipes and bar-end mirrors. I just figure I can't let Sarnali recycle his bikes more than I do! The ST4 was a great bike over 24,000 miles.

I just realized that all my current bikes will be air-cooled.

45 degree Vtwin
90 degree L twin
Parallel twin 2 stroke
Single 80cc 2 stroke

Not a radiator among 'em! And not one over 100 hp. I'm not gonna have any fun!:cool:
I think my current bunch may not have 100HP when added together!
I envy you. That Duc is such a fine looking bike. There was this rich kid in high school who had one that looked a lot like it. The little bastard had a Lotus Europa too.

N-Joy, send feelthy peectures!
Jeez Buzz, you would think living in SD with 3 street bikes the entire board would offer to visit and buy you a beer. Wait til it snows and disconnect your phone.
LR,

You lose the 'Busa?

Buz, you're gonna have to throw a die to choose your steed du'jour!
LR,

You lose the 'Busa?

Buz, you're gonna have to throw a die to choose your steed du'jour!
l

Well I rode the H-D today because I needed to go to the mall and pick up my laptop from the Apple dealer and then I rode the RD400 around town just to piss people off!

Dang that thing is loud.
Some day you should...

l

Well I rode the H-D today because I needed to go to the mall and pick up my laptop from the Apple dealer and then I rode the RD400 around town just to piss people off!

Dang that thing is loud.
...put in 20:1 premix and then ride back and forth in front of the Sierra Club offices. Then do the same in front of the Federal Bldg where the EPA has its offices.
...put in 20:1 premix and then ride back and forth in front of the Sierra Club offices. Then do the same in front of the Federal Bldg where the EPA has its offices.
Well they banned leaf blowers in Del Mar. Maybe I'll ride this around there just to remind the locals of the good old days!
Uh, I think the Huffy would be a better choice...

Well they banned leaf blowers in Del Mar. Maybe I'll ride this around there just to remind the locals of the good old days!
...for weed-wacker imitations. In fact, that was the name of our motorized bicycle gang "Hell's Weedwackers".

Had a patch and everything...and you don't want to know what a prospect had to do to join...
...for weed-wacker imitations. In fact, that was the name of our motorized bicycle gang "Hell's Weedwackers".

Had a patch and everything...and you don't want to know what a prospect had to do to join...
That company doesn't carry any airfilters that fit. I'm gonna hafta make one out of a sweat sock or something. Any suggestions for filter material?

Ok I'll bite. What's the initiation?
Go to a local gun shop..

..buy a tin can of Benjamin .22 Caliber pellets for a pellet gun. The can is a perfect fit for making an air cleaner (that's what was on it when you got it). Cut a hole in the bottom of the can, to fit over the carb mouth, along with two 1/8th inch holes for the screws, and cut a big hole in the screw-top lid, and cover it with some wire mesh. Get some foam rubber for filter material, and bingo, neat lil' air cleaner.

We made prospects ride a flat black rattlecan 1981 450 Suzuki twin with a brown his 'n hers step seat, 6' sissy bar with a Maltese cross, ape hangers, and streamers on the grips for a month of Friday nights through Tujunga, down foothill blvd. If the prospect didn't get beat to death, or shot by the townsfolk who's motto is "it's a black & white world homie" they were in like flynn. Of course then they had to do the "walk of fire" afterwards, but that's another story...
See less See more
..buy a tin can of Benjamin .22 Caliber pellets for a pellet gun. The can is a perfect fit for making an air cleaner (that's what was on it when you got it). Cut a hole in the bottom of the can, to fit over the carb mouth, along with two 1/8th inch holes for the screws, and cut a big hole in the screw-top lid, and cover it with some wire mesh. Get some foam rubber for filter material, and bingo, neat lil' air cleaner.

We made prospects ride a flat black rattlecan 1981 450 Suzuki twin with a brown his 'n hers step seat, 6' sissy bar with a Maltese cross, ape hangers, and streamers on the grips for a month of Friday nights through Tujunga, down foothill blvd. If the prospect didn't get beat to death, or shot by the townsfolk who's motto is "it's a black & white world homie" they were in like flynn. Of course then they had to do the "walk of fire" afterwards, but that's another story...
Well you've exceeded my mechanical ability by about 1000% but at least I know where a gun shop is.
and you don't want to know what a prospect had to do to join...
Did it have something to do with "shaving" a particular body-part, with a particular type of "razor"? :-o
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top